The complete guide to wakeboarding ropes. How to crush your trick list.

Adjusting your wakeboard rope is the best kept secret to crush your trick list.

Determining the length of your wakeboard rope when riding can seem like a game of whack-a-mole if you’re not familiar with the physics behind wakeboarding. Everything wakeboarders do on the water is affected by the wakeboard rope — and even the smallest adjustment in wakeboard rope length can be the difference between the feeling of pure elation after landing a new trick or a painful reminder of its failure.

For as long as I’ve been coaching, wakeboarders have been asking me, ‘What rope length should I use?’ And the answer is always the same: ‘Well, it depends . . .’ I wish I had a simple  answer for everyone, but by its very nature, there’s just no cookie-cutter response to this question. It’s like asking, ‘What temperature is best for cooking?’ The answer will always be: ‘Well, it depends . . .’

Let’s dive into what wakeboarding rope length ‘depends’ on and how you can use this knowledge to your advantage. In short, the progression of learning and landing a new wakeboard trick without taking hard falls is largely dependent on your knowledge of what length of rope you should be riding at that point in the trick’s ‘progression ladder’. So in other words, adjusting your wakeboard rope length to learn the foundational tricks that 'build up' to the more advanced trick is the most surefire way to quickly progress your riding.

To demonstrate this, I’ve outlined the trick progression of a frontside 360 that will show you how important wakeboarding rope length is to your riding.

First, a little wakeboard rope history

Using a wakeboard rope is the obvious difference and main factor for much of our identity compared to other boardsports like skateboarding or snowboarding. Only a long time watersport participant would really know (and appreciate) how much the ski and wakeboarding rope has evolved in the last three decades.

The most noticeable advancement over the years has been the material makeup of the rope. In the early days, wakeboarders used a water ski rope and learned to ride with the stretch that a cloth or early plastic rope yielded. In fact, some of the earliest water ski ropes were made out of linen. When plastics grew in popularity, the braided polypropylene rope soon hit the ski and wakeboard market.

After a few years of development they figured out how polyethylene can lower the stretch of a rope to give the rider a more responsive and consistent pull resulting in a better quality ride behind a boat. The drawback was that the ropes were heavy and larger in diameter — which left some room for improvement.

Nowadays rope materials have evolved to (and seem to have settled on) polyurethane coated Spectra and Dyneema. The switch to these present day materials took the majority of the stretch out the mainline and reduced the drag of the rope, giving the rider a more direct connection to the board and better overall control of their movement across the water and in the air.

Adjusting wakeboarding rope length: the science behind taking flight

The size of the boat wake is key!

To simplify your wakeboard rope length calculation a bit, there are really only two factors you’ll need to consider when dialing in your ideal rope length. The first is the shape of the wake. Knowing how to dial in your wake shape is crucial when adjusting your rope length. It sounds simple enough, but there are a long list of factors that can affect the shape of your boat wake  — and sometimes you’ll want to adjust your boat wake to match your desired line length - so it’s worth knowing how to do this.

The other key wake shaping factors to consider when shaping your boat wake include: ballast bag configuration, boat speed, wake shape, wake size, wake shaping device settings (i.e. the wedge, wake plate, NCRS, etc), altitude, boat hull shape and size, and even water depth.

The other main factor to consider for rope length is your skill level and the exact trick your working on. There are times that you would want a longer rope, a shorter rope, or something in between. As an example, for the frontside 360 trick progression, let’s assume that your wake shape and size is dialed in perfectly no matter what your rope length. This will allow you to focus solely on the ideal rope length for each step of learning the trick.

Why Rope length in wakeboarding is important

Ok, let’s talk about physics for a moment. Specifically, let’s explore the extremes between using really long wakeboard rope vs a really short wakeboard rope and how that will affect your riding.

When we dive into the physics, it’s easiest to relate to rope length as if we’re describing the shape and size of a circle. Imagine that a rope were to rotate all the way around the fixed tow point on the tower of a boat like a clock hand.

When the rope is really long, one full revolution in a circular path travels much further from the boat than a really short rope. The longer the rope, the larger the diameter of this circle, the slower and more controlled the pendulum swing will be for the rider behind the boat.

The large diameter will also give the rider more room to start the jump much further away from the wake. This wide approach gives the rider plenty of time to set up, adjust and build their ‘pendulum swing’ or momentum into the wake. This makes it feel less scary since there is more time to anticipate and react as you close in on the wake.

Inversely, when the rope is really short, one circularly revolution travels a much shorter distance from the boat. The smaller the diameter of this circle, the faster and more sensitive the pendulum swing or momentum will be for the rider. The smaller diameter and shorter approach forces the rider to shorten up his or her approach into the wake. This shorter approach can feel a bit scarier since there is little time to anticipate and react for the trick at the wake.

Wakeboard Rope lengths for beginner wakeboarders

Now that you understand some of the physics behind wakeboard rope length, let’s discuss how to apply this to riders just starting out.

The truth is, you’ll use both a long rope and a short rope when you’re learning. Simply adjust your rope length for the best match to whatever it is you’re working on. We’ve compiled a bullet list of reasons why you would use a short rope vs a long rope as a beginner.

The benefits of using a long wakeboard rope...

  • The rider has more room to move laterally behind the boat when traveling side-to-side.
  • The side-to-side movement is slower on longer rope [a larger arc]
  • The wakes are further apart the longer the rope is. This gives the rider more room to learn board control without being focused on the wake.
  • Surface turns and ollies will have less turbulence from crossing the wakes further behind the boat.
  • longer ropes gives the rider more room outside of the wakes to practice edging with less line tension.
  • When the rider edges back into the wake, there will be more natural momentum swinging the rider back toward the middle of the boat wake. This natural momentum allows the rider to focus more on the technique and timing of the jump and less on the speed and edge in toward the wake. Not only does it make it easier on the rider, but there is less things to think about.

The benefits of using a short wakeboard rope

  • The wakes are much narrower, which means less speed and height required to go wake to wake.
  • Since the wakes are narrower, the boat can slow down. When the boat goes slower, the wakes get bigger and wider. This allows the rider to go higher with less speed. The reduction in speed decreases the impact of falling and the overall intimidation factor, boosting confidence for new tricks.
  • Slower speeds combined with bigger, narrower wakes creates an ideal wake size for a beginner rider to learn his or her first wake jump.
  • The same wake size that allows the boat to go slower, reducing impact during a fall, can also be a great speed for a rider to learn his or her first wake-to-wake inverts or spins.
  • Once the rider can land a wake to wake jump and wants to learn how to land outside the wake into the flats, shortening the rope will require less speed to send it over the second wake.

The complete frontside 360 trick progression with varying rope lengths

Once understood, the ability to tailor your rope length to what you’re working on can be the most powerful tool for progression of your riding. To show you, let’s apply this to the frontside 360 trick and outline the rope length you’d use at each step in the process.

Heelside Frontside 360 Trick Progression

Before we get too deep into the rope length, first know the learning process recommended for a rider to land the frontside 360.

The most powerful way to analyze your ability or odds of landing a trick when your talking about wakeboarding, snowboarding, skateboarding, surfing or any board sport, is to understand the foundational tricks each advanced trick is built upon. For example, the heelside frontside 360 consists of two separate 180s.

The first 180, a heelside frontside 180, is an obvious prerequisite to the frontside 360. What most people miss, however, is the second 180. The second 180 is a switch toeside backside 180. The switch toeside backside 180 is arguably the most difficult on-axis 180 in wakeboarding. The problem is, most riders never learn this before their first 360 attempts. So they set themselves up for failure by combining the most difficult 180 with a very different feeling 180 - all in the air, going fast, at their normal riding speed and length. This is the “just go for it” mentality which usually results in painful consequences when the rider gets thrown off axis or becomes unbalanced in air. There is a time and a place to ‘just go for it’ if you have the strong foundation for each advanced trick. However, you’ll more than likely end up with pain if you don’t have the foundational tricks in the bag before your first attempt.

What any good coach or pro wakeboarder will do, is break down the trick down into smaller movements or tricks. Each foundational movement carries less risk of injury and more targeted repetition, increasing confidence throughout the trick.

In fact, if you’re struggling with the two 180s, you can even break those down further into four 90 degree surface spins, or a 270 plus a 90 surface spin. So it’s all about working on each part of the trick individually that when combined results in a polished, cool new trick. This is the quickest and most impactful way to learn.

Below are the basic foundational tricks for frontside 360 along with suggested rope lengths for each progression. Keep in mind that the estimated rope lengths and boat speeds are an estimate. They are going to vary based on the rider’s weight and the size and shape of the wake.

Frontside 360 surface movement

Long Rope Length (75ft +) | Slow Speed (12-18mph)

You’ll want to lengthen your rope out to about 75 feet or more to get as much room to play between the wakes as possible. This will give you less turbulence between the wakes and more lateral movement to prevent you from unintentionally bumping into the wakes on either side. Start out in the middle of the wake behind the boat at a slow speed and practice the 360 in tiny pieces. The trick progression should look something like this:

'Stationary' 360

For this movement, you should stay put in the same spot between the wakes.

  • Do a heelside frontside 180 on the surface.
  • Get ‘cuffed’ in the switch riding position. When done correctly, you’ll be facing away from the boat with both hands on the handle behind your back. Your chin should be up and your eyes looking behind you. Your shoulders should be perpendicular to the boat’s path, with your board tracking straight behind the boat. See the LearnWake instructional below for step-by-step directions on how to get into the cuffed riding position.
  • Then, keeping your upper body still, continue to rotate your lower body back towards the boat. This move is called a switch cuffed to cuffed position, or a switch toeside backside 180 on the surface. Similar to what is shown in this switch toeside backside 180 instructional video from LearnWake.
  • Move out of the cuffed riding position and relax into your normal riding stance, keeping only your front hand on the handle.

'Traveling' 360

For this movement you’ll start in between the wakes, but about a foot away from the wake closest to your toes, leaving plenty of room for you to edge across on your heelside edge towards the other wake. The rope length and boat speed should remain the same. This is where you will really benefit the most from having the longer rope length. The added distance between the wakes can save you from some unintentional edge catches that might have occurred on a shorter rope if you unintentionally ran into one of the wakes.

This portion of the movementl is almost identical to the movement above, but this time you will intentionally drift on the surface of the water from one side of the wake to the other side of the wake. This will mimic the lateral travel you’ll experience during your frontside 360 wake to wake. You’ll end up with the wake on your heels if you did this correctly.

  • Do a heelside frontside 180 on the surface.
  • Get cuffed in the switch riding position.
  • Then do a switch toeside backside 180 on the surface [switch cuffed to cuffed].
  • Get out of the cuffed riding position and relax into your normal stance, keeping only your front hand on the handle, with your head looking back away from the wakes for a few seconds.
  • Then look back at the boat and ride away normally.

Ollie 180s Linked

Long Rope Length (75ft +) | Slow Speed (12-18mph)

This is similar to what you just practiced above with a long rope and slow speeds. Only this time we’re going to add a little ollie bounce to it. The idea is not to ollie high, but to just practice pushing the ollie at takeoff, and taking the impact in the correct landing positions.

Keep the line length the same as before, but feel free to bump the speed up a tiny bit in case the water doesn’t feel firm enough when you attempt the ollie. The benefits of a long line will benefit you the same as it did in the previous drill when you’re between the wakes. When you’re outside the wake, you’ll benefit from the extra room to swing out away from the wakes as well as a less sensitive pull from the rope as you practice the handle pass.

Practice in the middle of the wakes (Stationary)

  • Do an ollie heelside frontside 180, landing switch, one-handed. If you’re looking to brush up on your heelside frontside 180s, practice the 180 progression drills in the LearnWake video below:
  • Get cuffed in the switch riding position.
  • Practice a few cuffed ollies. They don’t have to be big, or really even get off the water.
  • Then, practice a little ollie, followed by a cuffed to cuffed, switch toeside backside 180. It’s okay if you land at 90 in the cuffed slide, just finish the second 90 on the surface of the water.
  • Get out of the cuffed riding position and relax into your normal stance, keeping only your front hand on the handle, with your head looking back away from the wakes for a few seconds.
  • Then look back at the boat and ride away normally.

Practice your frontside 360 outside the wakes

Practice this outside the wakes on your heelside (the side you land your frontside 360 if you were to take it into the flats).

  • Do an ollie heelside frontside 180, landing switch, one-handed, over your toes.
  • Then, as quickly as you can, get cuffed in the switch riding position.
  • Ollie into a cuffed, switch toeside backside 180, landing in your normal stance, with only your lead hand on the handle and your head looking back away from the boat.
  • Once you’re settled, look back at the boat and ride away normally.

One Wake 180s Linked Together

Medium Rope Length (60-70ft) | Medium-Slow Speed (16-19mph)

For this movement, you’re going to go a little faster and shorten your rope length a bit. During this portion of the 360, you should be at a rope length of around 60 to 70 feet. This will clean the wakes up, position you at a nice transition through the wake, while still giving you enough room to ride between the wakes.

One Wake 360

  • Do a one wake heelside frontside 180, landing switch, one-handed, over your toes. You do not have to go big for this one. Just a small jump using an ollie edge will do — seriously, like mini 6” airtime will do it.
  • Then, as quickly as you can, while remaining in control, get cuffed in the switch riding position. For the remainder of this drill, you will remain in between the wakes.
  • Slide into a cuffed, switch toeside backside 180, stopping the rotation when you reach your normal stance, with only your lead hand on the handle and your head looking back away from the boat.
  • Once you’re settled, look back at the boat and ride away normally.

Two Wake Frontside 360

  • Do a one wake heelside frontside 180, landing switch, one-handed, over your toes. You do not have to go big for this one. Just a small jump using an ollie edge will do — again, 6” mini airs is fine.
  • Then, as quickly as you can, while remaining in control, get cuffed in the switch riding position.
  • Then, while cuffed, edge toward your landing side wake on your toes.
  • As soon as you begin to cross the second wake - the driver can strategically make this wake smaller than your take-off wake by turning the boat into the direction you are traveling as you approach the second wake.
  • From your cuffed position, slide over the whitewash into your switch toeside backside 180, landing in your normal stance and completely the rotation. Only your lead hand on the handle and your head looking back away from the boat. This should feel identical to the landing impact and position of your wake to wake 360.
  • Once you’re settled, look back at the boat and ride away.

One Wake Frontside 360

Medium Rope Length (60-70ft) | Medium-Slow Speed (17-20mph)

Keep your rope length the same as the previous movement. You should still be around 60 or 70 feet of rope. You may increase the speed by about half a mile per hour if you feel like the wake could clean up a little bit or if you felt bogged down at takeoff for the previous movement. Then the one wake 360 attempt is nearly identical to the one wake trick above, only you combine all of the steps in the air, rather maneuvering the last 180 after you land.

  • Approach and pop at the wake just like you did for your heelside frontside 180. The first part of the spin is identical speed and feeling to the ollie frontside 180.
  • Then, while in the air, push your board further than 180, into a 270, leading the second half of the spin with your lower body [like you did with the surface switch backside 180].
  • While in the air, just past the apex of the jump where you hit 270, pass the handle by getting into the cuffed position just like you practiced and complete the switch toeside backside 180, stopping the rotation when you reach your normal stance. Only your lead hand on the handle and your head looking back away from the boat.
  • After you impact and land in the middle of the wakes, look back at the boat and ride away.

If you’re struggling with getting your lower body to lead the spin, try this ollie 360 movement from LearnWake outlined in the video below:

Wake to Wake 360

Now that you’ve landed it one wake a few times and made that somewhat consistent, it’s time to take the trick wake to wake. It’s the same trick you’ve been doing, with a little more height, a little more patience at the wake, and a much shorter rope length. This makes it really easy to transition from your small one wake jump into your first wake to wake jump.

Short Rope Length (50-55ft) | Medium Speed (18-20mph)

Shorten your rope to about 50 or 55 feet. The wakes should be clean on your takeoff side, with a little whitewash on your landing side. This dramatic reduction in rope length may feel a bit weird on your first attempt but keep at it. So, take a few normal wake jumps to get used to it.

This shorter length will allow you to keep it slow, which will beef up the wakes and reduce the impact in the event of a fall. Remember to use a mellow ollie edge so your line tension remains low. This shorter rope length will take some getting used to, so be patient, relax, and remember you don’t need to try as hard as you think you do. Then try a few 180s to get the timing down.

  • Approach and pop at the wake just like you did for the wake to wake heelside frontside 180s you practiced. Remember, the first third of the rotation is identical to the 180.
  • Then, while in the air, push your board further than 180, into a 270, leading the spin with your lower body — just like you did for the one wake version, only slower since you have a little more airtime.
  • While in the air, just past the apex of the jump where you hit 270, pass the handle by getting into the cuffed position and complete the switch toeside backside 180, stopping the rotation when you reach your normal stance, with only your lead hand on the handle.
  • Keep your head looking back toward the wakes and resist the urge to look back toward the boat (otherwise you might over-rotate and slip out over your heels).
  • Once you land, ride away stoked.

Here’s a good example of a wake to wake 360 to mimic yours after:

Medium-Short Rope Length (55-60ft) | Speed (19-21mph)

Now that you’ve gotten your 360 wake to wake a few times at a short rope length and slow speed, bump up the speed a little and lengthen out your rope a bit. This will give you a longer approach arc, more natural momentum into the wake, more time to prepare, more time in the air, and less line tension.

The only drawback with all this extra time and slower tempo is that you have to be very patient. Mellow everything out, slow yourself down, and feel your way through the same 360 — just don’t rush it!

Medium Rope Length (60-65ft) | Speed (20-22mph)

This is literally the same progression, only your rope length is a little longer and your speed a little faster. This means you also have to be even more patient than before — but you’ll go higher and it’ll look and feel better.

Medium-Long Rope Length (65-70ft) | Speed (20-22mph)

Repeat the same thing, with a longer rope length and a little faster speed. Just enough to make the wakes perfect at each attempt. Practice a few wake jumps and 180’s each time just to make sure the speed and rope length feel right. Then, if you run into any issues, get too uncomfortable, or your bad habits creep back in, you can always go back a step or return to the first few drills to recalibrate.

Normal Freeriding Rope Length  | Normal freeriding Speed

This is it. You’ve made it! Now it’s time to try your heelside frontside 360 at your normal freeriding length and speed. The only change you need to make is more patience. This longer rope length will give you a longer approach, more natural momentum to help you edge, more time in the air, and less line tension throughout the entire trick and into the landing.

We may have already hit your normal freeriding length in one of the previous steps — and that’s fine. I wanted to give a longer freeride rope length as an example of just how incremental we can get with the rope length adjustments.

Once it’s dialed in, add some style to it with a grab, change the tempo a bit, and have some fun with it! Here’s another angle of a stylish 360 for you to model yours after:



Adjusting Your Wakeboard Rope Length to Shorten Your Learning Curve

All of this 360 instruction is to demonstrate how you can use different rope lengths to learn a new trick. This progression is not unique to a heelside frontside 360. It can also be applied to your first spins, some of your first inverts, and adapted to fit whatever your trick is. Generally speaking, the progression goes like this:

  • Long rope length for surface drills
  • Medium rope length for one wake drills
  • Short rope for your first wake to wake attempts
  • Progressively and incrementally let out your rope from the short rope length all the way out until you hit your normal freeriding rope length and boat speed.

That’s the long and the short of it! Properly applied, this should dramatically shorten your learning curve as well as reduce the impact and frequency of your hard falls.

If the D.I.Y. wakeboard rope length adjustment isn't yielding the results you're looking for, let's schedule a wakeboard clinic! I'll come to you and help you learn your goal tricks in person. For more information about private coaching, click here.

A quick word about wakeboarding competition rope lengths

Back in the early days of wakeboarding, boat and course limitations forced riders to set specific rope lengths in competitions. They also had to tell the judges what tricks they were doing before they rode — but I digress.

As boat wakes increased and judging standards changed, riders lengthened their ropes so they could go bigger. Riders who focused more on creating media (photos and video sections) often rode longer rope lengths because the added air time was more impressive and more fun because of hang time.

More recently, some competitive riders are riding shorter rope lengths once again (but not quite as short as it was back in the day) which causes them to slow the boat speed down a bit as well. This slower speed and longer rope length gives them a few competitive advantages.

First, a shorter wakeboard rope and slower speed means that they can fit more tricks into a fixed course length. The second advantage is that going slower makes the wake bigger, allowing helping them land doubles flips and wake to wake 1080s.

Riding shorter also allows the rider to create the look of going bigger (for a better score) because they are able to take their tricks out into the flats with less swing momentum. Since the wakes are narrower at the shorter rope length, the same lateral distance in the air looks further on a shorter rope when the second wake is the frame of reference.

Cable Park Riding And Wakeboard Rope Lengths

If you’re a boat rider that goes to the cable park for the first time, it will be wildly (and sometimes painfully) obvious to you that the differences in the rope from the boat to the park are significant. There are three main rope related factors that make park riding feel very different.

  • The first is that you’re edging toward obstacles that take you further away from your tow point (directly under the cable) at the park. Behind a boat, the momentum is the opposite direction; you’re edging toward the wake, bringing you closer to your tow point. This causes the line tension and edge technique to feel backwards at the park if you’ve only ridden behind the boat.
  • The second (and probably most obvious) rope related difference is the height of the tow point. Depending on the park, the cable might be two or three times the height of the tower on the boat. This can wear your arms out but it does make it easier to go higher.

Since you’re being towed, the rope is always following straight behind the tow point. If the tow point is to your left, it will encourage you to go left, if it is fifteen feet above you, it will encourage you to go up!

So, a higher tow point means that the rope is always trying to lift you up. The opposite effect is felt when you’re using a low tow point. If you’ve ever wakeboarding behind a boat using the water ski tow point, you’ll know that it almost feels like the rope is pulling you down when you’re in the air.

  • Depending on the cable park (some have strict, uniform policies on a predetermined rope length), you might have noticed that there are a few different rope lengths. Different lengths at the park can make quite a difference in the ride as well. In general:
    • Longer rope lengths help the rider reach cable park features that are a bit further away from the cable. A longer rope will also give the rider less pull back towards the center while on a feature. Beginners benefit from a longer rope because it’s much less sensitive when learning. You can get away with more mistakes when edging toward a feature, turning the corners, or even getting started off of the dock.
    • Shorter rope lengths are much better for air tricks or riders looking for a more sensitive, upward pull. Like I mentioned earlier about the higher tow point pulling you up, a shorter rope makes the angle of the rope steeper which pulls you upwards.

A few things to remember about rope length in wakesurfing

It may not seem like there’s much to talk about when it comes to the rope length you use when wakesurfing, but there are a few rope tips that are definitely worth covering.

First of all, never use a wakeboard rope or handle for wakesurfing. I know it’s cheaper because you don’t have to buy a wakesurf specific rope, but it’s just not worth the risk. Wakesurf specific ropes are much thicker in diameter.

A wakesurf rope is much safer. Wakeboard ropes can very easily get caught around your wrist if you fall. The larger, wakesurf specific rope won’t wrap around your arm because of the small handle. If you happen to fall through the handle with a thin wakeboard rope, it will be a guaranteed visit to the emergency room.

The wakesurf specific ropes usually have a very small handle or t-grip instead of the large triangular wakeboard handle. This is made so that you can’t accidentally get a limb or your head stuck if you fall on top of the handle while surfing.

There are often large knots added to the rope on a wakesurf handle used for pulling yourself forward on the rope. You can pull yourself towards the sweet spot so you can drop into the wave and find the sweet spot and ride the endless wave. Often there is extra rope dangling behind you as you pull yourself up to catch the wave. This is where the danger comes into play and the main reason using a thin wakeboard rope and handle is not a good idea.

Ideal scenario is to opt for the minimum rope length needed for the sweet spot. It’s safer if the you have less rope or no rope hanging behind you. That way, when you fall, there’s a much lower likelihood that you’ll even come in contact with the rope.

Once you’re up and riding, throw the rope to the opposite side of the wake and let passengers pull the rope in carefully. Do not throw the rope and handle into boat. There is a chance that you could wrap someone in the boat with the rope toss. More often than not the handle portion hits someone or damages the boat or handle.

Also, if you’re using a wakefoil, you can use longer rope to catch the second set of waves.

How to Determine Your Ideal Rope Length

Now that you’ve been thoroughly educated on the subject of wakeboarding rope length (and learned a heelside frontside 360 in the process), you should have the tools you need to determine your ideal rope length — regardless of what you’re working on. That said, sometimes it’s easier to have someone else do it for you or at least give you a second opinion.

We’re here to help! In fact, we’ve created a quick app called Rope Finder Magic to help make dialing in your wakeboard rope easier. Check it out below!